Introduction
Have you ever lost your TV remote and had to search for the one universal remote that fits your TV? Well, there’s no need to worry about that anymore! You can program a GE universal remote without codes in just a few simple steps.
Step One: Gather the Right Tools
In order to program your GE Universal Remote without codes, you will need a few things. First, of course, is the remote itself. You’ll also need a TV, and the make and model number of that TV. Finally, you’ll need a list of GE Universal Remote Codes for the specific device you’re trying to control.
Step Two: Find the Code List
There are a few different ways to find the code list for your GE Universal Remote. The first is to check the manual that came with the remote. This is usually the quickest and easiest way to find the codes you need.
If you don’t have the manual, or if you can’t find the codes in it, you can also try looking online. There are a few websites that have lists of codes for various devices, so you should be able to find the one you need with a little bit of searching.
Finally, if all else fails, you can always call GE customer service and ask for the code list. They should be able to help you out and get you what you need.
Step Three: Entering the Codes
Once you have the code list, it’s time to start programming your remote. To do this, you’ll need to put your remote into code entry mode. The exact steps for doing this will vary depending on the model of your remote, but it should be fairly easy to figure out.
Once you’ve done that, start entering in the codes from the list one by one. If the code works, your TV should turn off. If it doesn’t work, just keep trying other codes until you find one that does.
And that’s really all there is to it. Once you’ve found a working code, just hold down the button on your remote until the light blinks twice and then release it. That’s all there is to programming a GE Universal Remote without codes.
Step Two: Find the Code Lists
Now that you have your model number, it’s time to find the corresponding code list. Simply search for your model number and “code list” on Google. For example, if you have a GE universal remote with the model number 34722, you would search for “GE 34722 code list.”
You should be able to find the code list on the manufacturer’s website. If not, there are a few other places you can look, like RemoteCodeList.com or Remotes.com. Once you have the code list, proceed to step three.
Step Three: Program the Remote
Assuming you have your GE Universal Remote and the correct codes for your TV, follow these steps to program your remote:
1. Press and hold the “Setup” button on your remote until the button blinks twice.
2. Enter the code for your TV. The button will blink twice again.
3. Point the remote at your TV and press the “Power” button. The TV should turn off. If it doesn’t, repeat steps 2-3 with a different code.
4. Once your TV is off, press the “Setup” button again to exit programming mode.
Step Four: Test the Remote
Now that you have your new remote, it’s time to test it out. Start by turning on the TV. Then, press and hold the TV button on the remote. While holding the TV button, press the power button. The TV should turn off. If it doesn’t, try again with a different code.
If your TV turns off, congrats! You’ve successfully programmed your remote. If not, don’t worry. There are plenty of other codes out there to try. With a little patience and trial and error, you’ll be sure to find one that works for you.
Conclusion
If you need to program a GE Universal Remote without codes, there are a few different ways that you can do it. You can use the “Scan” method, which will scan through all of the available codes until it finds one that works with your device. Or, you can try the “Direct Code Entry” method, which allows you to enter a specific code for your device. Whichever method you choose, programming your GE Universal Remote without codes is easy and only takes a few minutes.
